Two Deck Bus Controls

• Each bus selects USB Port A or B computer playback, a Phono / CD deck input, or an Aux line-level input.
  • Gain trim and metering.
• Sweepable Low / High-pass effect Filter.
• 3-band full-cut tone controls:
  • Kill switches are momentary on/off.
  • Press SHIFT and a Kill to latch it on

Direct Serato Deck Controls

• Software FX on/off button.
• FX knob parameter adjustment:
  • Turn to scroll through FX.
  • Press to select the FX.
  • Hold SHIFT to change the Beats parameter.
• LOOP knob selects the loop length.
  • Press it to engage Auto Loop.
  • Hold down ROLL for Loop Roll.
• LIBRARY knob scrolls songs or crates:
  • Press to load a song or crate.
  • Hold SHIFT to tab between song and crate selection.
• TRANSFORM joystick:
  • Press for Transform on/off.
  • Transform on: any direction cuts the audio.
  • Transform off: multifunction software control (gray text).

Trigger Serato DJ Cues and Samples

• CUES / SAMPLES button toggles between Cues and Samples.
  • The button is lit when Cues are active.
• Four Cues per Deck. The active USB follows the Deck source selection.
  • Lit button colors match the Cue colors in Serato DJ software.
  • Press an un-lit button to create a new Cue. Hold SHIFT to delete a Cue.
• Six Sample triggers and Bank select buttons (Bank up and Bank down).
  • A lit button indicates a ready-to-play sample in Serato DJ.
    

The USB Aux Input is usually from the Serato SP-6 sample player, with it's own Level control, Low / High-pass sweep Filter and headphone cue. The USB Cue overrides any Deck Cue when it's on.

Dual USB Ports for Simple DJ Changeover

With a computer plugged into each USB port, simply switch a mixer Deck selector to USB A or USB B and audio and MIDI are assigned. Seamlessly switch from one DJ to the next using Serato DJ or other 3rd-party audio software.

Villa lobos an aria from bachianas brasileiras free mp3 download. Each port can stream 20 channels of low-latency audio at 44.1, 48, or 96 kHz.

A typical setup includes two Serato DVS decks, software FX through independent USB digital inserts for each Deck, and the SP-6 sample player on its own USB Aux input.

Deck Cue, Pan, and Split Cue

The Cue slider cues Deck 1 or Deck 2 by moving the slider accordingly. This lets you adjust a Deck volume in the headphones without raising the Deck Gain control.

When Split Cue is off, the Cue / Main Pan knob balances how much stereo cue and stereo main mix you hear in the headphones.

When Split Cue is on, the Cued Deck goes to the left headphone cup and the Main mix goes to the right cup. The Cue / Main Pan knob balances how much Cue (left) and Main (right) is heard in the headphones.

Magnetic Crossfader

The proprietary Rane magnetic fader is fast, accurate, and long lasting. The design uses non-contact technology previously reserved for demanding aerospace and industrial applications. No travel noise—no bleed—ever.

Rane's magnetic faders accurately translate hand motion into precise audio level control. Non-contact fader technology is the only way to fully address the needs of the professional performance DJ.

May 01, 2018  Plosives are strong blasts of air that create a massive pressure change at the microphone's diaphragm, and happen most often with strong p, t, k, and b sounds. RX can intelligently remove these from your audio using the De-plosive module. Sample: In this voiceover track, we can hear the pronounced p and b sounds. Izotope rx plosives. Quickly remove plosives with the De-plosive audio plug-in and module in iZotope RX 7. Improve the quality of your dialogue by getting rid of plosive pops and mic bumps that can occur during a recording. De-plosive has been developed to minimize plosives from letters such as p, t, k, and b, in which strong blasts of air create a massive pressure change at the microphone element, impairing the sound. Plosives are typically audible as low-end thumps, anywhere between 20–300 Hz, sometimes as high as 500 Hz. Oct 09, 2018  iZotope's RX 7 Advanced is an audio editor that allows you to fix sound that is not perfect. Here I show two of the many modules.

Includes Serato DJ software

Rane is pleased to announce that our products which previously included Serato Scratch Live software are now fully supported by and include Serato DJ software. DJs currently using Serato Scratch Live with supported Rane hardware have the option to migrate to the new and improved Serato DJ free of charge. If you’re familiar with Scratch Live, the transition to Serato DJ is easy and intuitive. Serato DJ is a free upgrade supporting the Sixty-One, Sixty-Two, Sixty-Eight, SL2, SL3, and SL4.

Serato DJ provides support for DVS (digital vinyl system), iZotope FX, Sync, Slip Mode, more Cue points, jump-to-loop, an improved 24-slot sampler and takes advantage of the high performance, ultra-low latency Rane ASIO and Core Audio drivers. Both programs share compatible song libraries, the same general workflow and deck layout.

Upgrading is optional -- Serato Scratch Live will still work with the Sixty-One, Sixty-Two, Sixty-Eight, SL2, SL3, and SL4. You can have both programs installed, and use one or the other

Analog Inputs

4 Stereo unbalanced RCA jacks

• Phono or Line level input, rear panel switches for each input.
  • Max Line Input: 4 Vrms
• Phono Response: RIAA ±1 dB, Gain: 31 dB at 1 kHz
  • Rumble filter: Butterworth 3rd-order Infrasonic
  • Max Phono Input:126 mV

ADCs

24-bit, 48 kHz; Dynamic range 102 dB A-weighted

DACs

24-bit, 48 kHz; Dynamic range 108 dB A-weighted

Digital Signal Processing

32-bit floating point

USB Audio

Five Stereo Record, Five Stereo Playback

44.1, 48, or 96 kHz, 32-bit floating point

FlexFX

Stereo unbalanced 1/4' TS (tip-sleeve) phone jack send and return

Mic Input

Balanced ¼˝ TRS & XLR combination jack.

Single-knob High / Low Tone control.

Mic / Line level switch to connect a wireless receiver.

Frequency Response

20 Hz to 20 kHz ±0.25 dB, Line in to Line out

Dynamic Range

101 dB A-weighted

THD+N

<0.01% re 0 dBFS, 20 to 20 kHz, 20 kHz BW

Line Outputs

Unbalanced jacks (RCA & FlexFX): Maximum 4 Vrms

Balanced jacks (Main 1/4˝): Maximum 8 Vrms

Internal Universal Power Supply

100 to 240 VAC, 50 Hz to 60 Hz, 15 W max

Unit Size

14˝ x 10˝ x 4˝ (35.6 x 25.4 x 10.2 cm)

8 lb (3.7 kg)

Shipping Size

7.75˝ H x 15˝ W x 19.25˝ D (19.7 x 38.1 x 49 cm)

12 lb (5.5 kg)